3d centrifugal pump dwg

Centrifugal pump for aqueduct projects. maximum working pressure: 10 bar ? liquid temperature range (clear water): - from -5°c to +90°c for the standard version; - from -5°c to + 120°c for special versions ? may > 0.4 ? poles: 2 and 4 ? insulation class: f (temperature rise class b) ? degree of protection: ip55 ? voltage: - three-phase 3~230/400v 10% (up to 4 kw included) - three-phase 3~400/690v 10% (from 5;5 kw) ? cast iron pump body aisi 304 stainless steel propeller (en 1.4301); in aisi 316 (in 1.4401) for 3dp 65 series? aisi 304 stainless steel shaft (en 1.4301) ? mechanical seal: standard = ceramic/carbon/nbr h = graphite/ceramic/fpm hs = silicon carbide/silicon carbide/fpm hw = tungsten carbide/tungsten carbide/fpm hsw = silicon carbide/tungsten carbide/fpm e = graphite/ceramic/epdm ? cast iron motor support back pull-out design: allows the motor to be removed; the coupling; cantilever support and impeller without compromising the pump body casing or removing piping ? an iec standard motor is used. this makes it easy to find a replacement motor; in case of need. ? capacity: up to 138 m3/h ? total height: up to 70 m